The short answer
College GPA = total quality points ÷ total GPA credit hours, where quality points = grade points × credit hours for each course. On the common 4.0 scale an A or A+ = 4.0, A− = 3.7, B+ = 3.3; on a 4.33 scale an A+ = 4.33 and A− = 3.67. Pass/fail and W grades add credit hours attempted but stay out of the GPA. Example: A+ (4 cr), B+ (3 cr), B− (4 cr), A− (3 cr) and a 1-credit pass give 3.41 on the 4.0 scale and 3.50 on the 4.33 scale.A college GPA calculator weights every grade by its credit hours: a 4-credit lab science moves your GPA more than a 1-credit seminar. Enter your courses term by term, choose the grade scale your school uses, and the calculator returns each term GPA, a running cumulative GPA, and the average you need for a target. It also handles the three things that trip people up in college: pass/fail grades, withdrawals and retakes.
Two neighbors cover narrower jobs. If you already know your cumulative GPA and only want to add one semester, the cumulative GPA calculator needs two numbers instead of a course list. If you are applying to college with honors or AP classes on your transcript, the weighted and unweighted GPA calculator adds bonuses that college transcripts don’t use.
How to use the college GPA calculator
- Pick the grade scale from your transcript or catalog. Most US colleges use plus/minus grades with an A+ capped at 4.0. Some give an A+ 4.33. A few use whole letters only.
- Enter a prior GPA (optional). If earlier terms are already on your transcript, type the cumulative GPA and the GPA credit hours behind it instead of re-entering every course.
- Add courses with credit hours and a grade. Choose P, NP or W for pass, no-pass and withdrawn courses.
- Tick Retake for a course that replaces an earlier grade, then enter the old grade and its credit hours.
- Add a term for each semester or quarter. The table shows credits attempted, credits earned, GPA hours, term GPA and cumulative GPA after every term.
- Set a target at the bottom to see the average you need over your remaining credit hours.
Your courses stay in this browser if “Remember my courses” is ticked. Nothing is uploaded.
The college GPA formula
Every letter grade has a point value. Multiply it by the course’s credit hours and you get quality points. Your GPA is the total quality points divided by the credit hours of courses that carry grade points:
GPA = Σ (grade points × credit hours) ÷ Σ GPA credit hours
A cumulative GPA uses the same formula across every term, so it is not a plain average of your term GPAs. A 15-hour semester counts more than a 12-hour one.
Worked example: one term on two scales
Here is a first semester with one pass/fail course, computed on both plus/minus scales:
| Course | Credit hours | Grade | Points (4.0 scale) | Quality points | Points (4.33 scale) | Quality points |
|---|---|---|---|---|---|---|
| Calculus I | 4 | A+ | 4.0 | 16.0 | 4.33 | 17.32 |
| Composition | 3 | B+ | 3.3 | 9.9 | 3.33 | 9.99 |
| General Chemistry | 4 | B− | 2.7 | 10.8 | 2.67 | 10.68 |
| US History | 3 | A− | 3.7 | 11.1 | 3.67 | 11.01 |
| Wellness | 1 | P | — | — | — | — |
| Total | 15 attempted, 14 GPA hours | 47.8 | 49.0 |
Table 1. Worked example: one term on a 4.0 scale and a 4.33 scale. Point values follow the University of Chicago College scale (4.0) and the Arizona State scale (4.33).
On the 4.0 scale the term GPA is 47.8 ÷ 14 = 3.41. On the 4.33 scale it is 49.0 ÷ 14 = 3.50, because the A+ adds 0.33 points per credit hour. The pass grade adds one credit hour attempted and earned, but it sits outside both the numerator and the denominator.
College grade point values by scale
Colleges publish their point values in the catalog or on the registrar’s site. These three show the main patterns you’ll meet:
| Grade | 4.0 scale | 4.33 scale | Whole letters (with half steps) | Source |
|---|---|---|---|---|
| A+ | 4.0 | 4.33 | — | UChicago, ASU |
| A | 4.0 | 4.00 | A = 4 | all three |
| A− | 3.7 | 3.67 | AB = 3.5 | UW–Madison |
| B+ | 3.3 | 3.33 | — | UChicago, ASU |
| B | 3.0 | 3.00 | B = 3 | all three |
| B− | 2.7 | 2.67 | BC = 2.5 | UChicago, ASU, UW–Madison |
| C | 2.0 | 2.00 | C = 2 | all three |
| D | 1.0 | 1.00 | D = 1 | all three |
| F / E | 0 | 0 | F = 0 | all three |
| P, W | not in GPA | not in GPA | not in GPA | ASU, UChicago, UW–Madison |
Table 2. College grade point values on three published scales: University of Chicago College (A+ = 4.0), Arizona State University (A+ = 4.33) and UW–Madison (whole letters with AB and BC half steps).
Arizona State adds a detail worth knowing: an A+ is worth 4.33 in a single course, but the registrar caps the cumulative GPA at 4.00. UW–Madison has no plus or minus grades at all; its AB and BC grades sit halfway between letters. The calculator’s “whole letters” option covers A, B, C, D and F only, so for AB and BC grades enter your transcript GPA as a prior GPA instead. The grading scale converter shows how common letter scales map to points.
Pass/fail, withdrawals and incompletes
These grades change your credit totals but not your GPA:
- P (pass): credit hours attempted and earned, no grade points. Arizona State’s registrar states that you earn hours for a P but the grade is not used to compute your GPA.
- NP or a failing pass/fail grade: credit hours attempted, none earned, no grade points at most schools.
- W (withdrawn): the course stays on your transcript, but the University of Chicago says a withdrawal does not affect the GPA calculation.
- F: counts fully. The credit hours go into the GPA denominator with 0 points, which is why one F in a 4-credit course pulls a GPA down so hard.
Credits attempted can still matter outside the GPA, for example in rules that compare credits completed with credits attempted. The table keeps both numbers so you can see the gap; your registrar or aid office can tell you whether it matters at your school.
Retakes and grade replacement
When a school replaces a grade, the first attempt stays on the transcript but leaves the GPA. Policies differ a lot. Arizona State lets undergraduates repeat a course with a D or E once, at ASU, and delete the first grade from the GPA; a C or higher generally can’t be repeated. Other schools average both attempts or count both.
Worked example. You start the term with a 3.00 over 30 GPA hours (90 quality points), and that record includes a 3-credit F. This term you retake the course and earn a B (3 credits, 9 points), plus an A in a 4-credit course (16), an A− (11.1) and a B+ (9.9), each 3 credits, and you withdraw from one 3-credit course.
- Term GPA: 46 ÷ 13 = 3.54.
- Without replacement: (90 + 46) ÷ (30 + 13) = 136 ÷ 43 = 3.16.
- With replacement, the F’s 3 hours and 0 points leave the record: (90 + 46) ÷ (27 + 13) = 136 ÷ 40 = 3.40.
That single policy is worth almost a quarter of a point here. Tick Retake only if your registrar confirms that the old grade is removed.
The target GPA back-solver
The back-solver answers “what do I need from here?” It uses your cumulative quality points and GPA hours:
needed average = (target × (GPA hours so far + future hours) − quality points so far) ÷ future hours
Continuing the example, a 3.40 over 40 hours with 30 hours left in the year:
- Target 3.50: (3.5 × 70 − 136) ÷ 30 = 3.63, about A− work in every course.
- Target 3.80: (3.8 × 70 − 136) ÷ 30 = 4.33. That is above a 4.0 maximum, so the calculator flags it as impossible. Straight A’s over 30 hours reach 3.66.
If a goal like a dean’s list cut-off or an honors threshold comes out above 4.0, spread it over more credit hours. Our guide to dean’s list GPA requirements lists typical cut-offs, and how to raise your GPA covers the course choices that move the number fastest.
Edge cases the calculator handles
- Prior GPA without a course list. Enter the cumulative GPA and the GPA hours from your transcript, not total credits earned, because transfer and pass credits don’t carry grade points.
- A retake of a course from an earlier term in the tool. The earlier term GPA stays as it was on your transcript; only the cumulative GPA changes from the retake term on.
- 4.33 results above 4.0. The calculator shows the true average and notes that some schools cap it at 4.00.
- Zero GPA hours. A term of only P or W grades shows “—” for the term GPA and leaves the cumulative GPA unchanged.
To read the final number as a letter or percent, see what your GPA means on the 4.0 scale. If one exam decides a course grade, the final grade calculator shows the score you need first.
Sources
- Grades and records, Arizona State University Registrar, accessed November 2026.
- Grading System, University of Chicago Office of the Registrar, accessed November 2026.
- Valid Grades, University of Wisconsin–Madison Office of the Registrar, accessed November 2026.
Frequently asked questions
How do I calculate my college GPA?
Do pass/fail classes affect my college GPA?
Does a W hurt your GPA in college?
Is an A+ worth 4.33 or 4.0 in college?
Does retaking a class replace the grade in my GPA?
What GPA do I need to raise my college GPA to a 3.5?
Sources & method
- Formula: quality points ÷ GPA credit hours, as described by the registrars cited below.
- 4.33 scale, P/Y excluded from GPA, W earns no credit, grade deletion for repeated D/E courses, 4.00 cumulative cap: Arizona State University Registrar, Grades and records.
- 4.0 scale (College) and 4.33 scale (Business), W does not affect the GPA: University of Chicago Registrar, Grading System.
- Whole-letter scale with half steps (A 4, AB 3.5, B 3 …) and pass/fail excluded from GPA: UW–Madison Registrar, Valid Grades.
Formulas checked November 2026. Spotted an error? Tell us via the about page.
